Service Clearance, Floor Cutout, And Floor Load Rating - Hitachi Universal Storage Platform VM Installation Planning Manual

Table 2-2: Component Specifications: Weight and Dimension
DKC-F605I-200S1

Service Clearance, Floor Cutout, and Floor Load Rating

This section describes the service clearance requirements (a + b) for the
Universal Storage Platform VM storage system in the HDS-supplied rack,
based on the floor load rating and the clearance (c) and required floor
cutouts for cabling.
• Single rack:
requirements for the single rack configuration.
shows the floor load rating and clearance requirements for this
configuration.
• Two racks:
floor cutout requirements for the twin rack configuration.
page 2-12
this configuration.
•
1100
1050
3250
1100
*1: The proper side clearance dimensions should be secured
corresponding to the 19-inch rack specifications.
Figure 2-4: Service Clearance and Floor Cutouts: Single Rack
Hitachi Universal Storage Platform VM Installation Planning Guide
Model Number
0.5
Figure 2-4 shows the service clearance and floor cutout
Table 2-5 on page 2-11
shows the floor load rating and clearance requirements for
*1
a 601
195
215
65 125
482
355
835
457
63 90
G
74
61.5 482
601
Front
DKC615
Installation Requirements
Weight (kg)
Width
—
Table 2-3 on page 2-10
shows the service clearance and
B *1
125
62
65
125
200 or more
565
c *1
Floor cutout area for cables
Screw jack
Caster
Service clearance
Grid panel (over 450mm x 450mm)
G
Dimension (mm)
Depth Height
— —
Table 2-4 on
(Unit : mm)
Rear
575
DKC615
1050.00
601
Front
2–9