Disassembling The Loading Door - Electrolux 6000 Service Manual

Disassembling the loading door:

1. Remove the (7) screws that attach the inner door
assembly to the outer door assembly. Lift the inner
door assembly out of the outer door assembly.
2. To remove the frame holding the outer lens in place,
release the three locking tabs holding the frame to
the outer door panel and lift the frame off.
3. With the frame removed, lit the outer lens out.
4. To remove the hinge assembly, remove the (3)
screws holding the hinge assembly to the inner door
panel and lift the hinge assembly out.
5. To remove the door seal, use a small common screw
driver from the back of the inner door panel and work
the locking tabs of the door seal through the panel.
Note: If the door seal is to be replaced, the door seal
can be pulled off from the front and the new door
seal can be installed without taking the door
part.
68