Removing The Door Switch; Removing The Front Panel - Electrolux 6000 Service Manual

2. Use a pair of pliers and push the catch forward until
the two metal prongs on the catch hits the catch
plate.
3. Using a small screwdriver, push down on the metal
prongs to release to catch out the front.

Removing the door switch

1. Disconnect the dryer from electrical supply, open
the door and remove the top.
2. Disconnect the wires from the door switch.
3. Squeeze the release tabs on the ends of the switch
and push it out the front.

Removing the front panel:

1. Disconnect the dryer from electrical supply and
2. Remove the (2) screws, one on each side, at the
3. Raise the front of the dryer and remove the (2) screws
:
70
remove the console.
bottom holding the front panel to the bodysides.
holding the bottom of front panel to the dryer base.