Panasonic AG-CPD15P Operating Instructions Manual page 118

Error messages
No.
E15753 Altered P2 Card found
on slot1. Backup data
and reformat.
E15754 Altered P2 Card found
on slot2. Backup data
and reformat.
E15755 VUP Card found on slot1.
Record cannot be started.
E15756 VUP Card found on slot2.
Record cannot be started.
E15757 Illegal Card found on slot1.
Record cannot be started.
E15758 Illegal Card found on slot2.
Record cannot be started.
E15759 Unformatted Card found on slot1.
Record cannot be started.
E15760 Unformatted Card found on slot2.
Record cannot be started.
E15761 Write Protect Card found on slot1.
Record cannot be started.
E15762 Write Protect Card found on slot2.
Record cannot be started.
E15763 No Card.
Record cannot be started.
E15764 Write Error.
Record cannot be started.
E15765 Card Full.
Record cannot be started.
118
(continued)
Message Measure
P2 card data has been modified on
another device.
Upload or export data to back it up and
reformat the card.
The P2 card contains an update file.
Insert a P2 card other than the one
containing the update file.
The inserted card cannot be used.
Check card type.
An unformatted P2 card has been
inserted.
Replace it with a formatted P2 card.
The write-protection switch on the P2
card is set to the "PROTECT" position.
Slide the write-protection switch away
from the "PROTECT" position.
No P2 card is inserted. Insert a P2 card.
The P2 card cannot be written to.
Replace the P2 card.
8 GB or lower capacity P2 cards:
The following conditions may have occurred.
• There is no space left on the P2 card.
• The P2 cards inserted in P2 card slots
1 and 2 contain 20,000 or more files.
Replace the P2 card with a P2 card
with free capacity, or free up space in
the P2 card for new data.
16 GB or higher capacity P2 cards:
The following conditions may have occurred.
• There is no space left on the P2 card.
• The P2 cards inserted in P2 card slots
1 and 2 contain 20,000 or more files.
• The maximum number of files that
can be recorded has been exceeded
for that day.
• The number of recording days has
been exceeded
Replace the P2 card with a P2 card
with free capacity, or back up the data
on the P2 card and reformat it.