Answering A Call Via The Loudspeaker (Speakerphone Mode); Switching To Speakerphone Mode - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Answer
+
if nec.
+
if nec.
+
if nec.
Answering a call via the loudspeaker (spea-
kerphone mode)
Suggestions for using speakerphone mode
• Tell the other party that you are using speakerphone
mode.
• The speakerphone works bests at a low receiving
volume.
• The ideal distance between the user and the tele-
phone set in speakerphone mode is about 50 cm
(approx. 20 inches).
The phone is ringing. The caller appears on the screen.
n
Press the key shown. The LED lights up.
or
Confirm.
The speakerphone function is activated.
-
or
Set the call volume. Keep pressing the key until the
desired volume is set.
Ending a call
n
Press the key shown. The LED goes out.
or
s
Press the key shown.

Switching to speakerphone mode

Prerequisite: You are conducting a call via the handset.
n \
Hold down the key and replace the handset. Then re-
lease the key.
-
or
Set the call volume. Keep pressing the key until the
desired volume is set.
U.S. mode
If the country setting is set to U.S. (ask the service per-
sonnel), you do not have to hold down the loudspeaker
key when replacing the handset to switch to speaker-
phone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.
-
or
Set the call volume. Keep pressing the key until the
desired volume is set.
Basic functions
31