Activating Tone Dialing/Dtmf Suffix-Dialing - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Conference g
End conference
Conference g
Drop last conf. party
Calls
DTMF dialing
Ending a conference
Confirm.
Select and confirm the option shown.
or
\
Replace the handset, if this feature is configured (con-
tact your service personnel).
Removing the ISDN central office party from the
conference
Confirm.
Select and confirm the option shown.

Activating tone dialing/DTMF suffix-dialing

You can transmit dual-tone multifrequency (DTMF) sig-
nals to control devices such as an answering machine
or automatic information system.
N
Open the Program/Service menu
g
Select and confirm the option shown.
Select and confirm the option shown.
j
You can use the keys
(
to transmit DTMF signals.
Ending the call also deactivates DTMF suffix dia-
ling.
Your system may be configured so that you can
start DTMF suffix-dialing immediately after set-
ting up a connection.
Enhanced phone functions
page 27.
0 9
through
)
, and
61