Using Team Functions; Activating/Deactivating A Group Call - Siemens HiPath 500 Operating Instructions Manual

Using team functions

Step by Step
Leave group
Join group
S
108
Using team functions
If configured (consult your service personnel), your tele-
phone is part of a team. The team consists of internal
phones that are able to use certain functions.

Activating/deactivating a group call

Special features must be taken into considerati-
on if your telephone operates with HiPath 5000
(system networking via PC network)
If configured (consult your service personnel), you be-
long to one or more groups of stations, which can be re-
ached via hunt group or group call station numbers.
Incoming calls are signaled one after the other (= hunt
group) or simultaneously (= group call) on all phones in
the group, until a group member answers the call.
You can also belong to a team (including executive/sec-
retary configurations) in which station numbers are pro-
grammed on trunk keys
Each station in the group can still be reached via their
personal station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding executive/secretary).
If the LED on a programmed "Hunt group" key is illumi-
nated
activated for at least one group.
This function is not available for the executive
phone in team/executive/secretary configurati-
ons.
c
Open the idle menu
Select and confirm the option shown,
or
select and confirm the option shown.
R
or
Press the "Hunt group".
page 113!
page 99.
page 67, this means that the audible tone was
page 22.