Making Calls; Off-Hook Dialing; On-Hook Dialing; Dialing With Dds Keys - Siemens HiPath 500 Operating Instructions Manual

Step by Step

Making calls

Off-hook dialing

^
Lift the handset.
j
Internal calls: Enter the station number.
External calls: Enter the external code and the station
number.
The called party does not answer or is busy
\
Replace the handset.

On-hook dialing

j
Internal calls: Enter the station number.
External calls: Enter the external code and the station
number.
Your system may also be programmed so that
you have to press the Internal key before you dial
an internal number.
To call an external party, you have to enter an ex-
ternal code before dialing the party's telephone
number (Prime Line is not active; contact your
service personnel).
The other party answers with speaker
^
Lift the handset.
or On-hook dialing: Speakerphone mode.
The called party does not answer or is busy
n
Press the key shown. The LED goes out.

Dialing with DDS keys

Prerequisite: You have saved a number on a DDS key
page 72.
S
Press the key with a saved number.
If the number is saved on the second layer, press the
shift key first.
You can press the DDS key during a call and au-
tomatically initiate a callback
Basic functions
page 36.
33