Wireless & Networks - Fujitsu F-02F Instruction Manual

WIRELESS & NETWORKS
Setting access point (APN)
Access point for connecting to the Internet (sp-mode) is
already registered. You can add and change access points if
necessary.
When using mopera U or Business mopera Internet, add
access point manually.
For details on mopera U, refer to mopera U website.
When Tethering is set to on, access point setting is
unavailable. P111
❖
Checking the access point in use
1
From the Home screen,
WIRELESS & NETWORKS, [More...] [Mobile
networks] [Access Point Names]
❖
Adding new access point (New APN)
Do not change the MCC/MNC to other than 440/10. The
setting disappears from the screen.
1
From the Home screen,
WIRELESS & NETWORKS, [More...] [Mobile
networks] [Access Point Names]
2
[New APN]
3
[Name] Enter a network profile [OK]
4
[APN] Enter the access point name [OK]
[Settings] In
[Settings] In
106
5
Enter other items required by network
operator [Save]
✔INFORMATION
If you have changed MCC/MNC settings and they do not
appear on the APN list screen, reset access point or make
access point settings in [New APN] again.
❖
Initializing an access point
By initializing an access point, the default state is restored.
1
From the Home screen,
WIRELESS & NETWORKS, [More...] [Mobile
networks] [Access Point Names]
2
[Reset to default]
✔INFORMATION
You can delete access point one by one by selecting an
access point from the APN list screen,
❖
sp-mode
sp-mode is an ISP for NTT DOCOMO smartphone. In addition
to accessing Internet, you can use the mail service using the
same address as i-mode mail (@docomo.ne.jp), etc.
sp-mode is a service requiring subscription. For details on
sp-mode, refer to NTT DOCOMO website.
[Settings] In
Tap [Delete APN].
Settings