Fujitsu F-02F Instruction Manual page 75

Broadcast wave and service area
The radio wave received via Mobacas differs from that of
received via Xi/FOMA service and 1Seg/terrestrial digital
broadcasting (Full Seg). For this reason, the signal cannot be
received at places where the Mobacas broadcast does not
reach or while broadcasting is out of service, regardless of
whether the terminal is outside or inside the Xi/FOMA service
area.
In the following places, the signal status may become weak
or the signal may not be received even if the terminal is
inside the area of Mobacas broadcasting service.
- Places that are far from the base station that sends signal
- Places where the signal is disrupted due to the landscaper
or structures such as mountain areas or behind buildings
- Places where the signal is weak or does not reach, such as
tunnels, basements, or places inside buildings
When displaying on the TV by MHL connection, the signal
status may become weak or the signal may not be received
even if the terminal is inside the area of Mobacas
broadcasting service.
TV antenna
When watching Mobacas or TV (Full Seg/1Seg), TV antenna
receives broadcasting airwaves.
Pull out the TV antenna thoroughly to the end.
To change direction of the TV antenna, hold the root part of
the TV antenna. Do not use excessive force.
To house the TV antenna, hold the root part of the TV
antenna and pull in until it stops. Do not pull in with holding
the top part of the TV antenna.
To improve signal reception
Fully pull out the TV antenna and changing the direction of
the TV antenna or moving to other location may improve
signal reception.
73
Applications