Fujitsu F-02F Instruction Manual page 147

Turning Bluetooth ON/OFF
Set Bluetooth to ON to use Bluetooth function. When you do
not use Bluetooth, set it to OFF in order to cut the battery
power consumption.
When activated, appears on the status bar.
Turning the power OFF does not change Bluetooth ON/OFF
setting.
1
From the Home screen,
2
[Bluetooth] to [ON]/[OFF]
When the screen about aptX appears, tap [OK].
Connecting with registered Bluetooth
devices
Connect Bluetooth device. You can listen to music via
Bluetooth device, send/receive data to/from another Bluetooth
device, etc. And you can enter characters on the terminal with
Bluetooth compatible keyboard.
Set a Bluetooth device to visible from other device in
advance.
When connected, appears on the status bar.
When profile is set to HSP/DUN/A2DP, only one Bluetooth
device is available to connect.
1
From the Home screen,
2
[Bluetooth]
When a Bluetooth device does not appear, tap [SEARCH
FOR DEVICES].
3
Tap a detected Bluetooth device Enter a pass
code (PIN) as required and [OK]/[Pair]
[Settings]
[Settings]
145
When connection is requested from another
Bluetooth device
If a Bluetooth pair setting request screen appears, enter a pass
code (PIN) if necessary and tap [OK], or tap [Pair].
To detect the terminal on other Bluetooth device
Tap [Not visible to other Bluetooth devices]/[Only visible to
paired devices] to switch to [Visible to all nearby Bluetooth
devices], then search devices on the Bluetooth device.
✔INFORMATION
A message notifying that communication charges may
become high appears when connecting with DUN (Dial-Up
Network Profile).
Sending or receiving data to or from
Bluetooth device
You can send data such as Gallery ( P90) and contacts or
receive data from a Bluetooth device.
Connect Bluetooth device in advance.
<Example> Sending files in Gallery
1
Open Gallery and touch and hold an image
2
[Bluetooth]/
3
Tap a Bluetooth device
Open the Notification panel to check if transmission is
completed.
Data communication