Toshiba MML-AP0074NH-E Installation Manual
Super modular multi system air conditioner
Hide thumbs
Also See for MML-AP0074NH-E:
- Owner's manual (26 pages) ,
- Service manual (132 pages) ,
- Owner's manual (268 pages)
Table of Contents
Advertisement
Quick Links
SUPER MODULAR MULTI SYSTEM AIR CONDITIONER
Installation Manual
For commercial use
Pour usage commercial
Nur für gewerbliche Nutzung
Per uso commerciale
Para uso comercial
Para uso comercial
Voor commercieel gebruik
Για εμπορική χρήδη
Для коммерческого использования
Ticari amaçlý kullaným için
Indoor Unit
Model name:
Console Type
MML-AP0074NH-E, MML-AP0074NH-TR
MML-AP0094NH-E, MML-AP0094NH-TR
MML-AP0124NH-E, MML-AP0124NH-TR
MML-AP0154NH-E, MML-AP0154NH-TR
MML-AP0184NH-E, MML-AP0184NH-TR
Installation Manual
Manuel d'installation
Installationshandbuch
Manuale di Installazione
Manual de Instalación
Manual de Instalação
Installatiehandleiding
Εγχειρίδιο Εγκατάστασης
Руководство по Установке 225
Montaj Kılavuzu
1
English
29
Français
57
Deutsch
85
Italiano
113
Español
141
Português
169
Nederlands
Ελληνικά
197
Pycckий
253
Türkçe
281
Advertisement
Table of Contents
Related Manuals for Toshiba MML-AP0074NH-E
Summary of Contents for Toshiba MML-AP0074NH-E
-
Page 1: Installation Manual
Ticari amaçlý kullaným için Manual de Instalación Español Manual de Instalação Português Installatiehandleiding Nederlands Indoor Unit Εγχειρίδιο Εγκατάστασης Ελληνικά Model name: Руководство по Установке 225 Pycckий Montaj Kılavuzu Türkçe Console Type MML-AP0074NH-E, MML-AP0074NH-TR MML-AP0094NH-E, MML-AP0094NH-TR MML-AP0124NH-E, MML-AP0124NH-TR MML-AP0154NH-E, MML-AP0154NH-TR MML-AP0184NH-E, MML-AP0184NH-TR... -
Page 3: Table Of Contents
Installation Manual Original instructions Please read this Installation Manual carefully before installing the Air Conditioner. • This Manual describes the installation method of the indoor unit. • For installation of the outdoor unit, follow the Installation Manual attached to the outdoor unit. ADOPTION OF NEW REFRIGERANT This Air Conditioner is a new type which adopts a new refrigerant HFC (R410A) instead of the conventional refrigerant R22 in order to prevent destruction of the ozone layer. - Page 4 • The qualifi ed installer is a person who installs, maintains, relocates and removes the air conditioners made by Toshiba Carrier Corporation. He or she has been trained to install, maintain, relocate and remove the air conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has been instructed in such operations by an individual or individuals who have been trained and is thus thoroughly acquainted with the knowledge related to these operations.
- Page 5 Installation Manual Defi nition of protective gear When the air conditioner is to be transported, installed, maintained, repaired or removed, wear protective gloves and ‘safety’ work clothing. In addition to such normal protective gear, wear the protective gear described below when undertaking the special work detailed in the table below.
-
Page 6: Precautions For Safety
Installation Manual PRECAUTIONS FOR SAFETY PRECAUTIONS FOR SAFETY The manufacturer shall not assume any liability for the damage caused by not observing the description of this manual. WARNING General • Before starting to install the air conditioner, read carefully through the Installation Manual, and follow its instructions to install the air conditioner. - Page 7 Installation Manual Electrical wiring • Only a qualifi ed installer(*1) or qualifi ed service person(*1) is allowed to carry out the electrical work of the air conditioner. Under no circumstances must this work be done by an unqualifi ed individual since failure to carry out the work properly may result in electric shocks and/or electrical leaks.
-
Page 8: Accessory Parts
Installation Manual CAUTION New refrigerant air conditioner installation • THIS AIR CONDITIONER ADOPTS THE NEW HFC REFRIGERANT (R410A) WHICH DOES NOT DESTROY OZONE LAYER. • The characteristics of R410A refrigerant are; easy to absorb water, oxidizing membrane or oil, and its pressure is approx. -
Page 9: Selection Of Installation Place
Installation Manual <Others> Name Owner’s manual Installation manual SELECTION OF INSTALLATION PLACE SELECTION OF INSTALLATION PLACE WARNING • Install the air conditioner at enough strong place to withstand the weight of the unit. If the strength is not enough, the unit may fall down resulting in injury. CAUTION •... -
Page 10: Installation Diagram Of Indoor And Outdoor Units
Installation Manual Installation diagram of indoor and outdoor units Do not allow the drain hose to get slack. Installation plate Cut the piping hole sloped slightly. 300 mm or more 300 mm or more Make sure to run the drain hose sloped downward. -
Page 11: Remote Control
Installation Manual Remote control • A place where there are no obstacles such as a curtain that may block the signal from the remote control. • Do not install the remote control in a place exposed to direct sunlight or close to a heating source such as a stove. •... -
Page 12: Cutting A Hole And Mounting Installation Plate
Installation Manual CUTTING A HOLE AND MOUNTING INSTALLATION CUTTING A HOLE AND MOUNTING INSTALLATION PLATE PLATE Cutting a hole CAUTION When installing the installation plate with a mounting (Rear piping) (Side piping) screw, do not use the anchor bolt hole. Otherwise the unit may fall down and result in personal injury and property damage. -
Page 13: Piping And Drain Hose Installation
Installation Manual PIPING AND DRAIN HOSE INSTALLATION PIPING AND DRAIN HOSE INSTALLATION Drainage How to install indoor unit 1. Run the drain hose sloped downwards. 1. Remove the air inlet grille. Open the air inlet grille and remove the strap. NOTE 2. -
Page 14: Concealed Installation
Installation Manual Mounting directly on the fl oor Concealed installation 1) Fix the leg of indoor unit on the fl oor with 2 mounting 1. Wall hole size screws. Wall hole size should be enough to keep the distance 2) Fix the upper part of indoor unit on the wall with 4 with indoor unit as shown in the following fi... -
Page 15: Refrigerant Piping
Installation Manual REFRIGERANT PIPING REFRIGERANT PIPING ▼ Projection margin in fl aring: B (Unit: mm) Refrigerant piping Rigid (Clutch type) 1. Use copper pipe with 0.8 mm or more thickness. Conventional R410A tool used 2. Flare nut and fl are works are also different from those Outer dia. -
Page 16: Electric Work
Installation Manual REQUIREMENT ELECTRIC WORK ELECTRIC WORK Tightening with an excessive torque may crack the nut depending on installation conditions. WARNING Tighten the nut within the specifi ed tightening torque. 1. Using the specifi ed wires, ensure to connect the wires, and fi... - Page 17 Installation Manual Power supply wire and communication wires specifi cations Power supply wire and communication wires are procured locally. For the power supply specifi cations, follow the table below. Power supply wiring and communication wiring are to be procured locally. For specifi...
-
Page 18: Wiring Example
Installation Manual Control wiring between indoor and outdoor units NOTE An outdoor unit that is interconnected to the indoor units automatically becomes the header unit. ▼ Wiring example Outdoor Power supply Outdoor Power supply 380V-415V ~, 50Hz 380V-415V ~, 50Hz 380V ~, 60Hz 380V ~, 60Hz Earth leakage... -
Page 19: Wiring Connection
Installation Manual Wiring connection How to connect the power supply wiring and control wiring REQUIREMENT Connect the control wire after connecting the power supply wire for this model. 1) How to connect the power supply wiring 1. Removing the front panel. 2. - Page 20 Installation Manual 2) How to connect the control wiring 1. Take the control wire out of the cable slot on the rear panel so that it produces about 600 mm form the front. 2. Remove the terminal cover (UP) 3. Remove the LED BASE 4.
- Page 21 Installation Manual Wiring connection for fl ow selector unit How to connect the wiring of fl ow selector unit Connect the power supply wire and the communication wire supplied with the fl ow selector unit to the indoor unit. 1.
-
Page 22: Applicable Controls
Installation Manual APPLICABLE CONTROLS APPLICABLE CONTROLS A wired remote controller is necessary for this function. This function cannot be operate with a wireless remote controller. REQUIREMENT When using the air conditioner for the fi rst time, it will take some moments after the power has been turned on before the remote controller becomes available for operations: This is normal and is not indicative of trouble. - Page 23 Installation Manual To secure better effect of heating Procedure Using “TEMP.” buttons, specify CODE No. When it is diffi cult to obtain satisfactory heating due to installation place of the indoor unit or structure of the room, the detection temperature of heating can be Procedure raised.
-
Page 24: Test Run
Installation Manual TEST RUN TEST RUN A wired remote controller is necessary for this function. This function cannot be operate with a wireless remote controller. In case of wired remote controller Before test run • Before turning on the power supply, carry out the following procedure. - Page 25 Installation Manual In case of wireless remote controller (Forced test operation is performed in a different way.) REQUIREMENT • For the operation procedure, be sure to follow the Owner’s Manual. • Finish the forced cooling operation in a short time because it applies excessive strength to the air conditioner. •...
-
Page 26: Trouble Shooting
Installation Manual TROUBLE SHOOTING TROUBLE SHOOTING A wired remote controller is necessary for this function. This function cannot be operate with a wireless remote controller. Confi rmation and check Procedure Every pushing of “TEMP.” button used to When a trouble occurred in the air conditioner, the check set temperature, the trouble history stored in memory is code and the indoor UNIT No. -
Page 27: Check Code List
Installation Manual Check method On the remote controller (Wired remote controller, Central control remote controller) and the interface P.C. board of the outdoor unit (I/F), a check display LCD (Remote controller) or 7-segment display (on the outdoor interface P.C. board) to display the operation is provided. - Page 28 Installation Manual Sending error in communication — between outdoor units — Duplicated follower outdoor addresses No. of outdoor units which Decrease of No. of connected outdoor received signal normally units E28 Detected outdoor unit number Follower outdoor unit error E31 Number of IPDU (*1) IPDU communication error —...
- Page 29 Installation Manual — — Indoor centre unit duplicated Indoor — Outdoor line address duplicated Duplicated indoor units with priority — — (Displayed in indoor unit with priority) Duplicated indoor units with priority L06 No. of indoor units with priority (Displayed in unit other than indoor unit with priority) —...
- Page 30 — purpose equipment control interface equipment I/F Differs according to error contents of unit with occurrence of alarm Group control branching unit error TCC-LINK — — (L20 is displayed.) Duplicated central control addresses TCC-LINK: TOSHIBA Carrier Communication Link. 28-EN –28–...
- Page 31 Installation Manual WARNINGS ON REFRIGERANT LEAKAGE Check of Concentration Limit Important The room in which the air conditioner is NOTE 2 : to be installed requires a design that in The standards for minimum room volume are the event of refrigerant gas leaking out, its as follows.
- Page 32 CONFIRMATION OF INDOOR UNIT SETUP Prior to delivery to the customer, check the address and setup of the indoor unit, which has been installed in this time and fi ll the check sheet (Table below). Data of four units can be entered in this check sheet. Copy this sheet according to the No.