Electra Elite Ipk Ii Iad(8)-U( ) Etu; Description - NEC Electra Elite IPK II Installation And Maintenance Manual

C h a p t e r 1
___________________________________________________________________________________
S 1 D
ECTION ESCRIPTION
The IAD(8)-U( ) ETU is an optional interface package for Electra Elite IPK II KTS that
can combine trunk and tie line calls into H.323 trunks. This ETU can be assigned as
a 2-port TLI(2)-U10, 4-port DID (4)-U10, 4-port or 8-port DTI-U10 ETU, COI/
COID(4)-U10, or 8-port COI/COID(8)-U10.
The onboard 10/100 base T-connector provides WAN/LAN connectivity. The NEC
IAD ETU contains a regular TCP/RTP/IP stack that can handle real time media,
supports industry standard H.323 communication on the WAN side, and interfaces
with the Electra Elite IPK II as a regular interface board. The IAD card, from the
network administration perspective, is an end-point on the IP network. For the KSU
system technician, it is just like any other trunk interface (depending on the operating
mode described in
This interface can provide:
K
K
K
K
K
K
K
K
K
K
K
K
___________________________________________________________________________________
Hardware, Installation and Maintenance Manual

Electra Elite IPK II IAD(8)-U( ) ETU

Chapter 4 IPK II IAD(8)-U( )
DTMF detection
DTMF generation
Real-Time Transfer Protocol (RTP) port number designation )
Type of Service (TOS) field Quality of Service (QOS) support
Tone generation
General Tone detection
G.711, G.723 and G.729a voice compression
10/100 BASE-T LAN interface
Caller ID detection (when in COID mode/DTI/ANI)
Remote configuration and maintenance
H.323 Gatekeeper support
H.323 V1/V2 signaling protocol
Configuration).
1 - 1