Service - Miele Touchtronic T1302 Technical Information

T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
4

Service

4.1 Drum Support Housing – Removal
Caution
To prevent damage to the Rear Drum Bearing, ensure the drum is
empty and no excess weight is placed on the drum while the drum
support housing is uninstalled from the appliance.
1. Remove the Lid (010 4.1).
2. Remove the Fascia Panel (060 4.4)
3. Remove the Electronic (060 4.5).
4. Remove the Fascia Panel frame.
5. Remove the Front Panel (010 4.3)
6. Remove the Fan Impeller (040 4.4)
7. Remove the Support Bracket (010 4.5)
8. Remove the screws from around the drum support housing.
9. Unclip the bulb holder.
10. Disconnect the connector for the Temperature Sensor.
11. Disconnect the cable from the Door Lock Button.
12. Slide the drum support housing upward to release the retainers
from the frame. Lift the drum support housing from the
appliance.
13. Reassemble by following these instructions in reverse order.
Reassembly Note
Ensure all locking tabs on drum support housing are fully engaged
in the frame before installing any retaining screws.
49
Technical Information