T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
4.5
Electronic / Controls - Service Position
Note
The electronic can be positioned into the retaining slots on the
sides of opening during service procedures.
1. Remove the Fascia Panel (060 4.4)
2. Refer to Figure 060-2.
3. Remove the two screws.
4. Carefully pull the control module forward.
Figure 060-2: Electronic retaining screws
5. Refer to Figure 060-3
6. Release the button assembly and slide it out of its retainer.
73
Technical Information