Table 2-6. Mid Power Trunnion Kit - Motorola ASTRO APX O2 User Manual

Standard Configurations Radio Mounting
2.2.1 Dash Mount with Trunnion
NOTE: This configuration is not applicable for 100W radios.
1. Referring to
2. Select the location to mount your radio on the transmission hump (see
the dash (see
NOTE: When mounting the trunnion on the transmission hump take care the transmission housing is
not affected. Plan your installation ensuring enough room for the Accessory connector and
cable in the back of the radio.
3. Using the trunnion mounting bracket as a template, mark the positions of the holes on the
mounting surface. Use the innermost four holes for a curved mounting surface such as the
transmission hump, and the four outmost holes for a flat surface such as under the dash.
4. Center punch the spots you have marked and realign the trunnion in position.
5. Secure the trunnion mounting bracket with the four self-drilling screws provided
(see Figure 2-25
6. Ensure that the plastic guides are aligned (horizontal) to the grooves of the trunnion. Slide the
radio into the grooves until it snaps into place (see
Item Part Number
0371859H01
1
0305760W02
2 0312002B14
HLN7002_
3
HLN6861_
6878215A01
Figure 2-6, select the suitable trunnion kit per the type of mid power transceiver.
Figure 2-26).
and Figure 2-26).

Table 2-6. Mid Power Trunnion Kit

Description
Trunnion Mounting Screw
Trunnion Mounting Wing Screw
Self-Drilling Tapping Screw
Mackinaw Trunnion Hardware Kit
Millenium Trunnion Hardware Kit
Figure 2-26).
Mid Power Transceiver
APX 5500/APX 6500/APX 6500 Li/APX 7500
APX 2500/APX 4500
APX 5500/APX 6500/APX 6500 Li/APX 7500
APX 2500/APX 4500
APX 5500/APX 6500/APX 6500 Li/APX 7500
APX 2500/APX 4500
2-21
Figure 2-25) or under