Functions; Stapling; Stacker Tray Ejection Mode; Paper Stack Capacity - Dell 5130cn Service Manual

4. Functions

4.1 Stapling

- Stapling Position: Front Corner
- Maximum Stapling Capacity: 50 sheets (90 g/m
- Staple Capacity: 5,000 or more

4.2 Stacker Tray Ejection Mode

The ejection mode is automatically selected from Set Mode and Sheet Mode depending on the paper
size.
- Set Mode: The sheets are deposited in the Compile Tray, and then ejected to the Stacker Tray.
- Sheet Mode: The sheets are directly ejected to the Stacker Tray. Offset stacking and stapling cannot
be used in this mode.

4.3 Paper Stack Capacity

Tray
Stacker Tray
(Set Mode)
Stacker Tray
(Sheet Mode)

4.4 Paper Size and Available Functions

Paper Size
A4 (210 x 297 mm)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11 in.)
Folio (8.5 x 13 in.)
Legal (8.5 x 14 in.)
Executive (7.25 x 10.5 in.)
Envelope #10 (4.125 x 9.5 in.)
Monarch (3.875 x 7.5 in.)
Yes: Supported
Finisher Service Manual
Version 1 2009.03.31
Paper Size
A4
B5
A5
Letter
Executive
C5
Legal
Other than those above 300 sheets
Set Mode
No: Not Supported
2
or less)
Non-staple
1,000 sheets
750 sheets
Stacker
Sheet Mode
Yes Yes
No Yes
Yes Yes
Yes Yes
Yes No
Yes Yes
Yes Yes
No Yes
No Yes
8 – 5
Chapter 8 Printer Specifications
Staple
50 sets or 750 sheets
50 sets or 500 sheets
-
Offset Staple
Yes Yes
No
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
No
No
No
No
No