Dell 5130cn Service Manual page 39

Removal 11 PWBA MAIN A4FIN (PL14.4.12)
Use a wrist strap to protect the PWB from electrostatic damage.
In the following steps, the details of Steps 1 through 3 are omitted because they are described earlier in
this chapter. Go to the steps in parentheses to execute the necessary steps, and then go to Step 4
onward.
1) Remove the TRAY STACKER. (Removal 1)
2) Remove the FINISHER ASSY. (Removal 2)
3) Remove the COVER REAR. (Removal 10)
4)
(P8987)
(P8980)
(P8990)
4) Disengage all the connectors of the PWBA MAIN A4FIN (PL14.4.12).
5) Remove the five screws (silver, flanged, 6mm) that fix the PWBA MAIN A4FIN to the FINISHER
ASSY.
6) Remove the PWBA MAIN A4FIN from the FINISHER ASSY.
Finisher Service Manual
Version 1 2009.03.31
(P8988)
(P8989)
(P8986)
(P8983)
(P8984)
(P8982)
(P8373)
5)
6)
5)
Chapter 3 Removal and Replacement Procedures (RRPs)
5)
5)
5)
3 - 25
Tbt03517KA