2. Removal Steps
Removal 1
KIT TRAY STACKER (PL14.1.98)
When performing the following step, use caution not to damage the GUIDE TAMPERs.
1)
Remove the TRAY STACKER (PL14.1.2) from the FINISHER ASSY by releasing the two hooks of
the TRAY STACKER.
Go to the next removal step:
Removal 2 KIT FINISHER ASSY (PL14.1.99)
Finisher Service Manual
Version 3 2009.07.03
Chapter 3 Removal and Replacement Procedures (RRPs)
1)-1
1)-1
3 - 6
GUIDE TAMPER
1)-2
Tbt03501KB