Dgna Reception; Dgna Auto Select Group; Viewing Dgna Talkgroups; Broadcast Call Initiated By User - Motorola MTM5400 Feature User Manual

Feature User Guide

3.2.7 DGNA Reception

When a DGNA message is received, your radio plays a tone and displays a message Talkgroup list updated. If
enabled by your service provider, your radio displays all added and deleted talkgroup list. If the DGNA message is
received to delete all talkgroups, your radio displays All Talkgroups Deleted. You can use the View, Attach, Back,
MENU key, ROTARY KNOB, END key, and EMERGENCY button. Pressing any of them exits the DGNA display.

3.2.8 DGNA Auto Select Group

If the DGNA Auto Select is configured, whenever your radio receives a DGNA, it switches to the added talkgroup.

3.2.9 Viewing DGNA Talkgroups

Prerequisites: Your radio receives the DGNA message.
Procedure Steps
To view the added talkgroups details press View.
1
2 Scroll through the list to select required talkgroup.
To select the DGNA group, press Attach.
3

3.2.10 Broadcast Call Initiated by User

This feature allows you to make a Broadcast Call from the radio that is initiated on the predefined talkgroup. Your
service provider predefines the alias and the priority of the Broadcast Call.
If the type of the encryption is defined by the BSI feature (radio with a SIM Card), the Broadcast Call is
always clear. Otherwise if the radio uses other encryption service the type of the encryption used for that
Call is up to the encryption settings of that service.
This feature is not supported on the Dimetra infrastructure.

3.2.11 Initializing Broadcast Call

Procedure Steps
From the home screen, press MENU key.
1
2 Select More . . . → Services → Broadcast.
Step result: Your radio displays the predefined alias and the Broadcast Call icon.
3-4 -