Feature User Guide
Select Setup → Time & Date → Set → Set Date.
2
3
Enter current time using NAVIGATION keys or keypad.
Press Done.
4
5.7.8.6 Setting Time Offset
Procedure Steps
1
From the home screen, press MENU key.
Select Setup → Time & Date → Set → Time Offset.
2
3
Enter time offset using NAVIGATION keys.
You can adjust the offset value, with 15 minute steps, up to 14 hours ahead or behind.
4
Press Done.
5.7.8.7 Setting Automatic Update for the Time and Date
Procedure Steps
From the home screen, press MENU key.
1
2
Select Setup → Time & Date → System Update.
Select one of the following:
3
• Off — All the infrastructure informations are ignored. The radio uses internal time and offset.
• Time Only — Time displayed is calculated from the offset programmed by your service provider
added or subtracted from the infrastructure time.
• Time & Offset — Time and offset are updated after receiving from the infrastructure.
5.7.9 Accry (Accessory) Type
You can choose which of the accessory selection mode is active.
5.7.9.1 Selecting Accessory Type
Procedure Steps
1
From the home screen, press MENU key.
2
Select Setup → Accry Type.
5-32
-