Table of Contents
Advertisement
Feature User Guide
Wait for the Talk Permit tone (if configured) and then speak into the microphone. Release the PTT button to
2
listen.
The Group Call is received by all members of the selected group who have their units turned on and
are in range.
3.4.4 Receiving a Group Call in Idle
Procedure Steps
The radio receives a Group Call.
1
The incoming Group Call is signalled by a Receiving Group Call tone.
2
To respond, press and hold the PTT button.
3.4.5 Private Call
The Private Call, also called point-to-point, or individual call, enables calling between two individuals. No other
radio can hear the conversation. This call type can be carried out in two ways:
• Duplex call (if the system allows), in TMO Mode. Both parties can speak at the same time.
• Simplex call, in TMO or DMO Mode. Only one party can speak at a time.
When a DMO Private Call takes place, radios not involved in this call receive the channel busy indication. The
radios are identified using its radio numbers.
Interaction with the accessories:
• Fist Microphone — during the Private Call, if you hang the microphone into the clip the call ends or the
audio switches to the speakers (if connected).
• Telephone Style Handset — during the Private Call, if you hand the handset into the holder, the call ends or
the audio switches to the speakers (if connected).
3.4.6 Private Call With Presence Check
This feature allows you to see if the calling party is available.
When this feature is enabled, you can only initiate a Private Call if the called radio is present on the same channel
and responds with a presence check acknowledgement. Otherwise your radio displays Party not available.
3.4.7 Communication through Repeater
Radios that cannot communicate directly between each other in DMO Mode, can do it through the repeater that is
attached on the same talkgroup. This connectivity is used to enhance the radio DMO area.
3-8
-
- Quick Links:
- Controls and Indicators
Hide quick links:
Advertisement
Table of Contents
