Panasonic DP-C406 Operating Instructions Manual page 38

No. 30 - 39
No. Parameter
30 Colour Spec(Overlay)
31 Mono Colour Judge
Level
32 Colour Toner Save(T)
33 Colour Toner Save(T/
P)
34 Colour Toner Save(P)
35 Colour Toner
Save(Other)
36 Mono Toner Save(T)
37 Mono Toner Save(T/P) In the Monochrome mode, set the level of
38 Mono Toner Save(P)
39 Mono Toner
Save(Other)
38
Comments
Set the default overlay colour.
Preset 1 to 6 can be selected when you set
"20 Add User Colour" in the Copier Settings.
Set the auto detection level for colour original.
• 1:
Making an original easier to detect as
monochrome.
• 7:
Making an original easier to detect as
coloured.
In the Colour mode, set the level of toner
saving when the original type is "Text".
In the Colour mode, set the level of toner
saving when the original type is "Text/
Photo".
In the Colour mode, set the level of toner
saving when the original type is "Photo".
In the Colour mode, set the level of toner
saving when the original type is "Other
Types".
In the Monochrome mode, set the level of
toner saving when the original type is "Text".
toner saving when the original type is "Text/
Photo".
In the Monochrome mode, set the level of
toner saving when the original type is
"Photo".
In the Monochrome mode, set the level of
toner saving when the original type is
"Other Types".
Selective Item
Full, Red, Magenta,
Green, Cyan, Blue, Black,
Yellow, White, Preset1,
Preset2, Preset3, Preset4,
Preset5, Preset6
1 to 7
None, Level 1, Level 2,
Level 3, Level 4, Level 5
None, Level 1, Level 2,
Level 3, Level 4, Level 5
None, Level 1, Level 2,
Level 3, Level 4, Level 5
None, Level 1, Level 2,
Level 3, Level 4, Level 5
None, Level 1, Level 2,
Level 3, Level 4, Level 5
None, Level 1, Level 2,
Level 3, Level 4, Level 5
None, Level 1, Level 2,
Level 3, Level 4, Level 5
None, Level 1, Level 2,
Level 3, Level 4, Level 5
After setting this parameter, turn the machine's
power switch Off, and then On again.
Standard
Setting
Full
4
None
None
None
None
None
None
None
None