Key Operator Mode - Panasonic DP-C406 Operating Instructions Manual

Key Operator Mode

No. 0 - 9
No. Parameter
00 Print Printer Settings
01 Job Completion Time
02 Page Protection
03 Error Page Print
04 Spool Function
05 Text Print
07 Font List Print (PCL)
08 Font List Print (PS)
09 Printer Language
80
Comments
Print the Printer Settings list.
To cancel printing the parameter setting list,
select "Stop" and "OK".
While processing the cancellation, panel
operation is denied, and an error beep is
produced.
The feeding paper(s) will be ejected before
completing the above cancellation operation.
If setting a parameter, an asterisk mark (*) will
be added before the parameter number.
Set the time-out period if the machine does not
receive a print signal from the computer for a
specified time.
Select "Input", and then enter the job
completion time.
Set to "On" to use page protection.
Set to "On" to print the data of an error job.
Set to "On" to set the spool function.
Set to "On" to print a text with no pictures.
Print the PCL font list.
Print the PS font list.
When the optional Printer Controller Module
® ®
(for Adobe PostScript 3™) is installed.
Set a printer language.
• Auto
The machine prints received data by
automatically judging the printer language.
• PCL
The machine prints received data by
regarding the printer language as PCL.
• PS
The machine prints received data by
regarding the printer language as PostScript.
When the optional Printer Controller Module
(for Adobe PostScript 3) is installed.
Selective Item Standard
Setting
Stop, Start Start
1 to 999 (Sec) 180 (Sec)
Off, On Off
Off, On On
Off, On On
Off, On On
Stop, Start Stop
Stop, Start Stop
Auto, PCL, PS Auto