Chapter 4 Datawedge Configuration; Introduction; Basic Scanning - Motorola ET1 Integrator Manual

CHAPTER 4

Introduction

DataWedge is an application that reads data, processes the data and sends the data to an application.

Basic Scanning

To capture bar code data:
Ensure that an application is open on the ET1 and a text field is in focus (text cursor in text field).
1.
Aim the rear-facing camera at a bar code.
2.
Press and hold either Scan/Action button. By default, a preview window appears on the screen. The
3.
Decode LED lights red to indicate that data capture is in process.
Data Capture
Figure 4-1
Move the ET1 until the bar code is centered.
4.
The Decode LED lights green and a beep sounds, by default, to indicate the bar code was decoded
5.
successfully. The captured data appears in the text field.
DATAWEDGE
CONFIGURATION