Datawedge Settings - Motorola ET1 Integrator Manual

<intent-filter . . . >
<action android:name="android.intent.action.DEFAULT" />
<category android:name="android.intent.category.MAIN" />
. . .
</intent-filter>
In the Intent output plug-in configuration, the Intent action would be:
android.intent.category.DEFAULT
and the Intent category would be:
android.intent.category.MAIN
The Intent delivery option allows the method by which the intent is delivered to be specified. The delivery
mechanisms are Send via startActivity, Send via startService or Broadcast intent.
The decode related data added to the Intent's bundle can be retrieved using the
Intent.getStringtExtra()
•
String LABEL_TYPE_TAG = "com.motorolasolutions.emdk.datawedge.label_type";
String contains the label type of the bar code.
•
String DATA_STRING_TAG = "com.motorolasolutions.emdk.datawedge.data_string";
String contains the output data as a String. In the case of concatenated bar codes, the decode data is
concatenated and sent out as a single string.
•
String DECODE_DATA_TAG = "com.motorolasolutions.emdk.datawedge.decode_data";
Decode data is returned as a list of byte arrays. In most cases there will be one byte array per decode.
For barcode symbologies that support concatenation e.g. Codabar, Code128, MicroPDF, etc., the
decoded data is stored in multiple byte arrays (one byte array per bar code). Clients can get data in each
byte array by passing an index.
Most scanning applications might want the user to be able to decode data and for that decode data to be sent
to the *current* activity but not necessarily displayed. If this is the case, then the activity needs to be marked
as 'singleTop' in its AndroidManifest.xml file. If your activity is not defined as singleTop, then on every decode,
the system will create another copy of your Activity and send the decode data to this second copy.
Finally there will be a configuration option for each process plug-in so that the process plug-in can be
configured specifically for the intent output, which in this case is the basic data formatting process plug-in.

DataWedge Settings

The DataWedge Settings screen provides access to general, non-profile related options. Touch
Settings.
.
and
Intent.getSerializableExtra()
DataWedge Configuration 4 - 17
calls, using the following String tags:
>