Datawedge Settings - Motorola ET1 Integrator Manual

4 - 28 ET1 Enterprise Tablet Integrator Guide
ADF Sample Screen
Figure 4-16
Ensure that an application is open on the ET1 and a text field is in focus (text cursor in text field).
37.
Aim the exit window at the bar code.
38.
Sample Bar Code
Figure 4-17
Press and hold the Right Scan/Action button. The red laser aiming pattern turns on to assist in aiming.
39.
Ensure that the bar code is within the area formed by the aiming pattern. The Left and Right LEDs light red
to indicate that data capture is in process.
The Left and Right LEDs light green, a beep sounds and the ET1 vibrates, by default, to indicate the bar
40.
code was decoded successfully. The formatted data 000129X<space> appears in the text field.
Scanning a Code 39 bar code of 1299X15598 does not transmit data (rule is ignored) because the bar
code data did not meet the length criteria.
Formatted Data
Figure 4-18

DataWedge Settings

The DataWedge Settings screen provides access to general, non-profile related options. Touch
Settings.
>