Configuration File Management; Enterprise Folder; Auto Import; Programming Notes - Motorola ET1 Integrator Manual

4 - 30 ET1 Enterprise Tablet Integrator Guide

Configuration File Management

The configuration settings for DataWedge can be saved to a file for distribution to other ET1 devices.
After making configuration changes, export the new configuration to the root of the microSD card. The file
created is automatically named datawedge.db. This datawedge.db file can then the copied to the microSD card
of other devices and imported into DataWedge on those devices. Importing a configuration replaces the
existing configuration.

Enterprise Folder

Internal storage contains the Enterprise folder (/enterprise). The Enterprise folder is persistent and maintains
data after an Enterprise reset. After an Enterprise Reset, DataWedge checks folder
/enterprise/device/settings/datawedge/enterprisereset/ for a configuration file, datawedge.db. If the file is
found, it imports the file to replace any existing configuration.
A Factory Reset deletes all files in the Enterprise folder.
NOTE

Auto Import

DataWedge supports remote deployment of a configuration to the ET1, using tools such as MSP. DataWedge
monitors the /enterprise/device/settings/datawedge/autoimport folder for the datawedge.db file. When
DataWedge launches it checks the folder. If a datawedge.db file is found, it imports the file to replace any
existing configuration. Once the datawedge.db file has been imported it is deleted from the folder.
While DataWedge is running it receives a notification from the system that a datawedge.db file is placed into
the /enterprise/device/settings/datawedge/autoimport folder. When this occurs, DataWedge imports this new
configuration, replacing the existing one and delete the datawedge.db file. DataWedge begins using the
imported configuration immediately.
NOTE It is strongly recommended that the user exits DataWedge before remotely deploying any configuration. It
is required that the dataWedge.db file permissions are set to 666.

Programming Notes

Remap Keys

By default, the ET1 is configured to use the Left and Right Scan/Action keys to initiate scanning. To use the P1,
P2 or P3 keys as a scan trigger:
Touch > Settings > Applications > Button Remap Program.
1.
Touch P1, P2 or P3.
2.
Select L1 Button or R1 Button.
3.
Touch Home.
4.