Remove A Wi-Fi Network; Static Ip Address - Motorola ET1 Integrator Manual

NOTE When entering exceptions, do not use spaces or carriage returns between addresses.
In the No Proxy for text box, enter addresses for web sites that do not require to go through the proxy
6.
server. Use the separator "|" between addresses.
Touch Save.
7.

Remove a Wi-Fi Network

To remove a remembered or connected network:
Touch > Setting > Wireless & networks.
1.
Touch Wi-Fi settings.
2.
In the Wi-Fi networks list, touch and hold the name of the network.
3.
In the menu, touch Forget network.
4.
Touch .
5.

Static IP Address

By default, the ET1 is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet
protocol (IP) address when connecting to a wireless network. To configure the ET1 to connect to a network
using a static IP address:
Touch > Setting > Wireless & networks.
1.
Touch Wi-Fi settings.
2.
Touch > Advanced.
3.
Touch Use static IP checkbox.
4.
Touch IP address and enter an IP address for the device and then touch OK.
5.
If required, touch Gateway and enter a gateway address for the device and then touch OK.
6.
If required, touch Netmask and enter an netmask for the device and then touch OK.
7.
If required, touch DNS 1 and enter a Domain Name System (DNS) address and then touch OK.
8.
If required, touch DNS 2 and enter a DNS address and then touch OK.
9.
Touch Home.
10.
DataWedge Configuration 5 - 5