Call Origination (Pcs Only); Figure 15. Radio Comm Screen; Figure 14. Radiocomm Com Port - Motorola A920 Service Manual
Hide thumbs
Also See for A920:
- Reference manual (144 pages) ,
- Instruction manual (106 pages) ,
- Service manual (59 pages)
Table of Contents
Advertisement
Level 3 Service Manual
Call Origination (PCS Only)
Before beginning, one of the following test command
procedures needs to be completed.
Handset Test Command
•
Power up phone
•
Enter the following key sequence
•
Menu 0 H T C M D *
•
Enter the following test commands in the
Opcode screen
•
54 ok
•
10*0*5
•
Power cycle phone
RadioComm Test Command
•
Connect as illustrated in figure 13
•
Power up phone
•
Start RadioComm application
•
Correctly select Settings option for USB or
serial
Figure 14. RadioComm COM Port
Preliminary
SUSPEND
CPLOAD, GSM 1900
Motorola Confidential Proprietary
GSM/DCS/PCS Call Processing
•
Click on AT+/mode, suspend, CP_Mode 1900,
respectfully
Figure 15. Radio Comm Screen
•
Power cycle phone
Repeat steps 1 through 10 in the ,"Call Origination
(GSM and DCS only)," section with the following modi-
fications,
•
Set PCS Signalling
•
BCH = 661
•
TCH = 512
Once PCS call processing is complete, return the phone
to its original state by performing the following proce-
dure,
Handset Test Command
•
54 ok
•
10*0*10
•
Power cycle phone
Computer Test Command (Radio Comm)
•
Click on AT+/mode, Suspend, CP_Mode 900/
1800, respectfully
•
Power cycle phone
Manual Test Procedures
SUSPEND
CPLOAD, Dual mode
3 - 5
Advertisement
Table of Contents
