Figure 3.9 [Customer Information Review] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 3 REMCS Service Start Procedure
3.2 REMCS Center Registration
Machine 30
Installation
Site
Machine 20
Installation
Building
FE's E-mail 60
Address
Delete the Check box
personal
information
*1: Considered personal information to be protected. If the personal information is deleted from the window
shown in FIGURE 5.7 [Deleting the personal information] window
from the MMB customer information.
*2: The number of characters in the zip/postal code depends on the country in which the PRIMEQUEST
2000 Series server is installed.
1. Enter the customer information.
2. Click the [Next] button.
After the customer information is registered, the window shown in
Review] window
3. Click the [Next] button.
Optional N/A
Optional N/A
Optional Applicable
Optional N/A
appears.

FIGURE 3.9 [Customer Information Review] window

characters).
Specify the country name with the code in
the A2 column of ISO-3166 Code Table
(two letters). For a country not specified in
the table, specify 99.
Enter the machine installation site (not
required if it is the same as the [Address]
value).
Enter the machine installation building
name (not required if it is the same as the
[Address] value).
Enter the e-mail address of the installer
(field engineer). E-mail notification of
completion of the connection check is
also sent to this email address.
Specify whether personal information
should be deleted. If checked, the values
entered for the items for which the
[Personal information] column in this table
indicates [Applicable] are not retained as
customer information for the MMB.
Checked: The values are deleted.
Not checked: The values are not deleted
(default).
by the FE, the information is deleted
FIGURE 3.9 [Customer Information
16
CA92344-0542-02