Adjusting The Subwoofer Output Level - JVC LVT0858-001A Instructions Manual

Sound Adjustments
STANDBY
STANDBY/ON
PHONES

Adjusting the Subwoofer Output Level

You can adjust the subwoofer output level if you have connected a
subwoofer and set the subwoofer information correctly—"YES"
(see page 15).
• You have to make this adjustment for each source.
Before you start, remember...
There is a time limit in doing the following steps. If the setting is
canceled before you finish, start from step 1 again.
1
Press ADJUST.
The CONTROL buttons now work for sound
ADJUST
adjustments.
2
Press CONTROL ∞ (or 5) repeatedly until
"SUBWFR (subwoofer)" (with the current
setting)* appears on the display.
CONTROL
R ΙΙ
O SR
T ATT
* "0" is the initial setting. If you have already changed the
setting, another number (level) will be shown.
22
CONTROL
5/∞/3/2
Display
TV DIRECT
DVD
CONTROL
ANALOG L C
LPCM
SUBWFR LFE
DOLBY D
LS S RS
DTS
SETTING ADJUST MEMORY
DVD
ADJUST
VOL
HOME CINEMA CONTROL CENTER
STB VCR TV TAPE FM/AM
PL ΙΙ
R SLEEP AUTO MODE TA HEWS INFO RDS TUNED ST AUTO MUTING
DSP HP
MH
Z
AUTO SR KH
Z
INPUT ATT VOL
ANALOG/DIGITAL
INPUT ATT
STB VCR TV TAPE FM/AM
3
Press CONTROL 3 (or 2) to adjust the sound
output level.
CONTROL
PR ΙΙ
ANALOG L C R
LPCM DSP
SUBWFR LFE
DOLBY D AUTO SR
LS S RS
DTS INPUT ATT
• Pressing CONTROL 3 increases the sound output level
(from –10 to +10).
• Pressing CONTROL 2 decreases the sound output level
(from +10 to –10).
When using the remote control
1 Press SOUND.
10 keys now work for sound adjustments.
2 Press SUBWOOFER +/– to adjust the sound output level
(from –10 to +10).
INPUT SURROUND SURROUND
ON/OFF MODE
MASTER VOLUME
VOL