Specifications - JVC LVT0858-001A Instructions Manual

Specifications

Amplifier
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/DIN):
Frequency Response (8 Ω):
Video
Video Input Sensitivity/Impedance (1 kHz):
Video Output Level/Impedance (1 kHz):
Signal-to-Noise Ratio (S/N):
Output Power At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Rear channels:
DVD, STB, VCR, TV, TAPE:
Coaxial:
Optical:
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
VCR, TV, TAPE:
DVD, STB, VCR, TV, TAPE:
DVD, STB, VCR, TV, TAPE:
Tone Control: Bass (100 Hz):
Treble (10 kHz):
Bass Boost: +6 dB ± 1 dB at 70 Hz
DVD, STB, VCR, TV: 1 V(p-p)/75 Ω
Composite video:
S-VIDEO: DVD, STB, VCR:
RGB: DVD, STB, VCR:
Composite video: VCR, TV:
S-VIDEO: TV:
RGB: TV:
45 dB
Synchronize: Negative
Designs & specifications are subject to change without notice.
60 W per channel, min. RMS, both channels driven
into 8 Ω at 1 kHz with no more than 0.9% total
harmonic distortion. (IEC268-3/DIN)
60 W per channel, min. RMS, driven into 8 Ω at
1 kHz with no more than 0.8% total harmonic
distortion.
60 W, min. RMS, driven into 8 Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
60 W per channel, min. RMS, driven into 8 Ω at
1 kHz, with no more than 0.8% total harmonic
distortion.
220 mV/47 kΩ
0.5 V(p-p)/75 Ω
DIGITAL 1 (DVD):
DIGITAL 2 (STB): –21 dBm to –15 dBm (660 nm ±30 nm)
220 mV
87 dB/62 dB
20 Hz to 20 kHz (±1 dB)
±10 dB
±10 dB
(Y:luminance):
(C:chrominance): 0.286 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
1 V(p-p)/75 Ω
(Y:luminance):
(C:chrominance): 0.286 V(p-p)/75 Ω
0.7 V(p-p)/75 Ω
TO BE CONTINUED ON THE NEXT PAGE
1 V(p-p)/75 Ω
1 V(p-p)/75 Ω
45