ABB HTP500 User Manual page 30

Press OK
Into the Devices and Printers folder you will find the file of origin P-PRINTER and the 6 devices installed with
the following names:
HTP500 V2 TERMINAL BLOCKS
HTP500 V2 CABLES
HTP500 V2 HORIZ METHACRYLATE
HTP500 V2 HORIZ PVC LABELS
HTP500 V2 OTHER TERMINAL BLOCKS
HTP500 V2 VERTICAL PVC LABELS
E) Devices settings in HTS500 Software with the use of the pre-defined profiles
The profiles contain the Driver settings (printable area, density, orientation, materials, feeder mode,
alimentation).
Execute the HTS500 Software.
Select the File Menu.
Select the Menu Plotter Setup.
The Window Setup Plotters/Printers appears.
Select the button on the Left in the First raw that is available in the Window.
Select the Printer EVO AUTOM CABLES