ABB HTP500 User Manual page 37

A new hardware found message appears.
The System Detected the Printer.
The Printer had been detected and had been added to the list of the available printers with the name P-
PRINTER
B) Check of the automatically assigned plug and play port
From Windows:

Select Start

Select Printers and Devices

Select Printers and Faxes

Select the P-PRINTER Printer.

Press the Right Key of the Mouse.

Select Printer Property.

Select the Ports Folder.
Verify which is the connection Port that had been assigned to the P-PRINTER Port during the Driver Installation.
For instance the detected port is USB001.
C) Eliminate the option for the prints confirm
From the printers folder right button of the mouse on one of the HTP500 V2 driver:

Select Properties

Select Utility

Select Printer Settings

Select Review Mode

Select OFF
Confirm with OK and APPLY
D) Copy Installation of the 6 Printing Devices for Windows 7
Restart the PC, connect the HTP500 V2 to the USB port and switch on the printer.
Select the HTS500 CD
Select the subfolder \Drivers
Select the subfolder \HTP500 V2
Select the subfolder \ENG
Select the subfolder \Copy Driver Eng
Runs the PRPCOPY.exe
The following window appears
Select RUN
file with a double click
The Driver Installation proceeds.