International - HP Jetdirect pn1050 Setup Manual

International

For regulatory identification purposes, your product is assigned a regulatory
model number. The regulatory model number for your product is listed below.
This regulatory number is different from the marketing name and product
number.
Manufacturer's Name:
Manufacturer's Address:
declares that the product:
Product Name: Jetdirect en3700 External Print Server, Jetdirect pn1050
Model Number: J7942A, L2130A
Regulatory Model Number: RSVLD-0101
conforms to the following Product Specifications:
Safety: EN60950 (1992) +A1,A2,A3,A4,AII / IEC 950 (1991) +A1,A2,A3,A4
EN60825-1 (1994) / IEC 825-1 (1993), Class 1
GB 4943 (1995)
EMC: EN 55022 (1998) / CISPR-22 (1997) Class B
GB 9254 (1988)
EN 55024 (1998)
IEC 61000-4-2 (1995); EN 61000-4-2 (1995)
IEC 61000-4-3 (1995); EN 61000-4-3 (1996)
IEC 61000-4-4 (1995); EN 61000-4-4 (1995)
IEC 61000-4-5 (1995); EN 61000-4-5 (1995)
IEC 61000-4-6 (1996); EN 61000-4-6 (1996)
IEC 61000-4-8 (1993); EN 61000-4-8 (1993)
IEC 61000-4-11 (1994); EN 61000-4-11 (1994)
EN 61000-3-2 (1995)
EN 61000-3-3 (1995)
FCC Title 47 CFR, Part 15 Class B
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC
and the EMC Directive 89/336/EEC and carries the CE marking accordingly.
This product was tested in typical configurations with Hewlett-Packard Co. products.
Roseville, March 4, 2003
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,
Department TRE, Herrenberger Straße 130, D-71034 Böblingen (FAX:+49-7031-14-3143).
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN45014
Hewlett-Packard Company
8000 Foothills Blvd.
Roseville, CA 95747-5677
U.S.A.
Jill Stevenson,
Product Regulations Manager
Reference Information 21