Easy Series (ICP-EZM2) | Installer Guide | 2.0 Installation
2.8
Phone Line Connections (Step 8)
Connect the incoming phone line and the house
phone to the control panel board.
2.9
Insert Voice Module (Step 9)
The voice module is required for system
operation.
2.10
EZTS Connections (Step 10)
If the optional EZTS Tamper Switch was
installed in Step 1 on page 8, connect its cable to
the two-pin connector on the control panel.
18
Bosch Security Systems, Inc. | 5/07 | F01U025147-01