Programming Mode Level - Panasonic KX-NCP500 Programming Manual

4.12 [2-7-1] Class of Service—COS Settings
Manager
COS Name
Specifies the name of the COS.
Value Range
Max. 20 characters
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
None
Feature Guide References
2.2.1 Class of Service (COS)
Group Forward Set
Enables setting call forwarding for calls to an incoming call distribution group.
Value Range
Disable: An extension cannot set call forwarding for any group.
Enable-All: An extension can set call forwarding for all groups.
Enable-Group: An extension can only set call forwarding for the group to which the extension belongs.
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
5.14 [3-5-1] Incoming Call Distribution Group—Group Settings—Member List
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
6.10 [4-2-1] Portable Station—Extension Settings—Main—
Feature Guide References
1.3.1.2 Call Forwarding (FWD)

Programming Mode Level

Specifies the level of authorisation for performing PT programming.
Value Range
Disable: A PT user cannot perform any programming.
PROG Only: A PT user can perform only personal programming.
PROG and PROG **/*#: A PT user can perform both personal and system programming.
542 PC Programming Manual
COS
COS