2-3] Timers & Counters - Panasonic KX-NCP500 Programming Manual

4.5 [2-3] Timers & Counters
4.5 [2-3] Timers & Counters
Various system timers and counters can be programmed.
Dial / IRNA / Recall / Tone
Automatic Redial—Repeat Counter
Specifies the number of times Automatic Redial is attempted before being cancelled.
Value Range
0–15
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
1.6.1.4 Last Number Redial
Automatic Redial—Repeat Interval
Specifies the length of time between repeated Automatic Redial attempts.
Value Range
10 ´ n (n=1–360) s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
1.6.1.4 Last Number Redial
Automatic Redial—Redial Call Ring Duration
Specifies the length of time that the PBX waits for the called party to answer an Automatic Redial attempt. This
is the length of time that the called party's extension will ring for each attempt.
Value Range
10 ´ n (n=1–30) s
470 PC Programming Manual