Panasonic KX-NCP500 Programming Manual page 25

Setting
Baud Rate (bps)
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate (bps)
Modem Initialise
Connection Settings for LAN
Setting
IP Address
Port Number
Values
2400, 4800, 9600, 19200,
38400, 57600, 115200
Values
1-9, 0, *, #, -, "," [comma],
T, P, W
Auto(Tone), Auto(Pulse),
Manual
Max. 40 characters
COMx
1200, 2400, 4800, 9600,
19200, 38400
–
Values
1.0.0.0–223.255.255.255
1–65535
2.1.1 Starting Maintenance Console and Software Modes
Explanation
Specify the speed of data transmission.
Explanation
Enter the telephone number to be dialled to access the
PBX.
T: Converts the Dial Type from Pulse to Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialling method.
If Manual is chosen, dialling must be done with a
connected telephone.
Enter a comment to identify the set of values.
Specify the number of the COM port assigned to the
PC's modem interface.
Only available COM ports will be displayed.
Specify the speed of data transmission.
Enter the modem initialise command, and click
Initialise to send the command to the modem.
For more details, refer to your modem's instruction
manual.
Explanation
Specify the IP address of the PBX on the LAN. Enter
the same IP address that was input in IP Address for
IPCMPR Card (for KX-NCP500/KX-NCP1000/
KX-TDE100/KX-TDE200)/IP Address for IPCEMPR
Card (for KX-TDE600) of 3.4 [1-1] Slot—Card
Property - IPCMPR (for KX-NCP500/KX-NCP1000/
KX-TDE100/KX-TDE200)/IPCEMPR (for
KX-TDE600).
It is also possible to search for the IP address by
clicking Search.
Specify the port number used to access the PBX via
LAN. Enter the same port number that was input in
Maintenance Port Number of 3.4 [1-1] Slot—Card
Property - IPCMPR (for KX-NCP500/KX-NCP1000/
KX-TDE100/KX-TDE200)/IPCEMPR (for
KX-TDE600).
PC Programming Manual 25