11-5] Air Synchronisation - Panasonic KX-NCP500 Programming Manual

13.6 [11-5] Air Synchronisation

13.6 [11-5] Air Synchronisation
It is possible to synchronise CSs with each other within the air synchronisation group.
Click Sort to reorder CSs with traditional CSs first, followed by IP-CSs.
To open the screen described in 2.6.17 Utility—CS Status Monitor, click CS Status Monitor.
Adding CSs
Follow the steps below to add CSs to the air synchronisation group.
1.
Connect the CS to be registered to the network and, if necessary, the power supply.
2.
Click Add.
A dialogue box will appear. Non-registered (available) CSs are displayed on the left.
3.
Highlight CSs and click the right arrow to select them for addition.
4.
Click OK.
Deleting CSs
Follow the steps below to delete CSs from the air synchronisation group.
1.
Click Delete.
A dialogue box will appear. Registered CSs are displayed on the left.
2.
Highlight CSs and click the right arrow to select them for deletion.
3.
Click OK.
Index
Indicates the CS number (reference only).
Value Range
1–32
Maintenance Console Location
13.6 [11-5] Air Synchronisation
Programming Manual References
None
Feature Guide References
None
Slot Type (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/Shelf (for
KX-TDE600)
Indicates the shelf type and/or position (reference only).
Value Range
For KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200:
Physical, Virtual
For KX-TDE600:
Shelf number, Virtual
954 PC Programming Manual