Panasonic KX-NCP500 Programming Manual page 819

Programming Manual References
None
Feature Guide References
None
CO-CO with DISA—DISA to Public CO
Specifies whether the DISA port of the message card is released when a trunk-to-public trunk call using DISA
is established. To enable this setting, "
should be set to "Enable".
Setting this to "Disable" will free up DISA ports faster, but prevent DISA being used to detect the end of a call
and disconnect the trunk quickly.
Value Range
Disable (Release DISA): The DISA port of the message card is released when a trunk-to-public trunk call using
DISA is established.
Enable: DISA stays connected for the duration of the call, to allow detection of the end of the call.
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
7.3 [5-3-1] Voice Message—DISA System—Option 1—
Feature Guide References
None
CO-CO with DISA—DISA to Private Network
Specifies whether the DISA port of the message card is released when a trunk-to-private trunk call using DISA
is established.
To enable this setting, "
set to "Enable".
Setting this to "Disable" will free up DISA ports faster, but prevent DISA being used to detect the end of a call
and disconnect the trunk quickly.
Value Range
Disable (Release DISA): The DISA port of the message card is released when a trunk-to-private trunk call
using DISA is established.
Enable: DISA stays connected for the duration of the call, to allow detection of the end of the call.
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
CO-CO with DISA—Fwd/Transfer to Public CO" on this screen
CO-CO with DISA—Fwd/Transfer to Private Network" on this screen should be
7.3 [5-3-1] Voice Message—DISA System
CO-CO with DISA—Fwd/Transfer to Public CO
PC Programming Manual 819