Panasonic DBS 576 Technical Manual page 117

Section 700 - Operation
To change the system date, time, and day of week:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 000.
3. Press the HOLD key.
4. Enter the year (two characters), month (two characters), and
day (two characters).
Note: To clear an entry or existing data, press the FLASH
key.
5. Press the HOLD key.
6. Enter the hour (two characters) and minute (two characters).
Note: To clear an entry or existing data, press the FLASH
key.
7. Press the HOLD key.
8. Enter the day of week where:
1 = Mon, 2 = Tues., 3 = Wed., 4 = Thurs., 5 = Fri., 6 = Sat.,
0 = Sun.
Note: To clear an entry or existing data, press the FLASH
key.
9. Press the HOLD key to store the entry.
10. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
576-51-700
Action
DBS 576 (USA) issued April 2002
Chapter 4. User Maintenance
Result
81-
User MAINT displays
0 :YYMMDD
Date displays
1 :HHMM
Time displays
2 :
Day of the Week displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
4-33