Panasonic DBS 576 Technical Manual page 149

Section 700 - Operation
There are two ways for an extension to park a call. One way is to park the call at the receiving
extension and to retrieve the parked call at another extension by dialing the park answer code plus the
parking extension number. The other way is to park the call at another extension and dial the park
transfer answer code at the other extension to retrieve the call. Beginning with Version 3.6, the user
may park the call at another extension by pressing the BLF key. In addition, an Extension Group
Pickup code allows the user to pick up a Transfer Recall (only on non-appearing calls), a Hold Recall,
and a Station Park Recall.
To park a call on this extension:
1. While on a call, press the HOLD key.
2. Enter the Call Park Hold access code (default =771) or press
the PARK HOLD key.
3. If necessary, page the party that needs to retrieve the call.
To retrieve a call parked at the originating extension from another extension:
1. Lift the handset or press the ON/OFF key.
2. Enter the Station Call Park Answer/Other Ext. access code
(default 773).
OR...
Enter the Station Call Park/Floating Hold Answer feature
access code (default = *9) (Version 2.0 or higher).
3. Dial the number of the extension that parked the call.
To park a call at another extension:
1. Press the HOLD key.
2. Enter the Call Park Transfer access code (default = 774).
3. Dial the extension number to receive the parked call,
OR
Press the BLF key
4. If necessary, page the party that needs to retrieve the call.
576-51-700
Action
Action
Action
DBS 576 (USA) issued April 2002
Chapter 5. Key Telephone Features
Result
• Current call on hold
• CO HOLD #XX displays (where XX =
trunk number)
Accepted ST-Park displays
Result
Intercom dial tone
Enter Park EXT # displays
• CO TALK TRK #XX displays (where
XX = line number)
• Connected to parked call
Result
• Current call on hold
• CO HOLD #XX displays (where XX =
trunk number)
Enter TRNS EXT # displays
Park (EXT#) displays on lower display
5-23