4. Remote controller
6.2. Laser power adjustment, Playback-only disc/magneto-optical
disc automatic adjustment
6.2.1. Enter the adjustment mode
1. Set the battery and connect the remote controller.
2. Turn off the power, and switch main unit's HOLD switch off.
3. Press the VOL+, VOL-,
controller within two seconds. (as shown in
4. When the adjustment mode is activated, " T1 EX " will be
displayed on the LCD of remote controller. After " T1 EX " is
displayed, select the desired adjustment item with the
or
button of the remote controller. (If it is not displayed,
perform the procedures written above again.)
Adjustment mode
, and
buttons on the remote
Fig. 5
17
Fig. 5
)
button