Normal Dubbing (From Vhs To Dv) - JVC SR-VS30U Instructions Manual

Filename [VS30U_3-EN.fm]
VS30U_3-EN.fm Page 55 Thursday, January 31, 2002 3:40 PM
Normal Dubbing
(from VHS to DV)
T
1
4
7
1
NOTES:
If you set the dubbing direction incorrectly, you could erase an
important recording that you wanted to copy. It is
recommended to conduct a test with unimportant cassettes
first.
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
To cancel the dubbing mode, press CH +/– so that the dubbing
direction indicator ( S-VHS) goes off.
Before you start dubbing, set "SOUND MODE" to the
appropriate mode. ( pg. 76)
Page 55
1 3 2
W
2 3
2
5 6
8 9
0
4
DV S-VHS
You can dub selected scenes on a tape, starting and
stopping wherever you wish.
A
Load cassettes.
For the VHS deck
Insert a VHS (or S-VHS) cassette with the record safety
tab removed.
For the DV deck
Insert a Mini DV cassette with the erase protection switch
set to "REC".
B
Select the dubbing direction.
Press .
The dubbing direction indicator (
C
Set the tape speed.
Press DV, then press SP/LP (
p
"VHS DV" appears on the TV screen if "SUPERIMPOSE" is
]
set to "ON". ( pg. 71)
D
Locate the start point on the VHS deck.
A Press S-VHS.
B Press PLAY (
) to start playback.
4
C Press PAUSE (
) to pause playback a little before the
9
start point.
E
Prepare the DV deck for dubbing.
A Press DV.
B Press and hold PAUSE (
) and press REC (
9
the DV deck enters the Record Pause mode.
VHS playback indicator and DV recording indicator light.
F
Start dubbing.
Press START.
G
Pause dubbing.
Press START.
The DV deck enters the Recording Pause mode, then the VHS
deck enters the Dubbing Pause mode.
H
End dubbing.
Press STOP ( ) to stop recording on the DV deck. Then
8
press S-VHS and press STOP (
VHS deck.
Masterpage:Right-NoTitle0
55
EN
S-VHS) lights.
).
) so that
7
) to stop playback on the
8
January 31, 2002 3:40 pm