Motorola AP-5131 Installation Manual page 35

9. Select the WLAN #1
its ESSID security scheme for basic operation.
A maximum of 16 WLANs are configurable within the AP-5131 Wireless
NOTE
Configuration screen. The limitation of 16 WLANs exists regardless of
whether the AP-5131 has a single or dual-radio.
a. Enter the Extended Services Set Identification (ESSID) and name associated with the
WLAN.
b. Use the Available On
the 802.11a or 802.11b/g radio. Ensure the radio selected has been enabled (see step 8).
c. Even an AP-5131 configured with minimal values must protect its data against theft and
corruption. A security policy should be configured for WLAN1 as part of the basic
configuration outlined in this guide. A security policy can be configured for the WLAN
from within the Quick Setup screen. Policies can be defined over time and saved to be
used as needed as the AP-5131's security requirements change. Motorola recommends
you familiarize yourself with the security options available on the AP-5131 before
defining a security policy.
10. Click Apply to save any changes to the AP-5131 Quick Setup screen. Navigating away from
the screen without clicking Apply results in all changes to the screens being lost, unless you
use the Un-applied Changes
11. Click Undo Changes
settings displayed on the AP-5131 Quick Setup screen to the last saved configuration.
tab (WLANs 1 - 4 are available within the Quick Setup screen) to define
checkboxes to define whether the target WLAN is operating over
pop-up window to overwrite the current settings.
(if necessary) to undo any changes made. Undo Changes reverts the
Basic AP-5131 Configuration 29