Putting The Handset Into Service; Removing The Protective Cover; Installing The Charger - Siemens HiPath 4000 Operating Instructions Manual

Putting the handset into service

Putting the handset into service

Removing the protective cover

Installing the charger

The charger is designed for operation in closed, dry rooms within a tem-
perature range of +5 °C to +45 °C.
Install the charger on a level, non-slip surface.
The phone's feet do not usually leave any marks on surfaces. However,
due to the multitude of different varnishes and polishes used on today's
furnishings, the occurrence of marks on the surfaces cannot be completely
ruled out.
Please note:
•
•
To disconnect the plug from the charger,
press the release button
nect the plug 4.
14
Remove the protective cover from the display before
putting the handset into service.
Never expose the telephone to the influence of heat sources, direct
sunlight or other electrical devices.
Protect your OpenStage SL4 professional from moisture, dust,
corrosive liquids and fumes.
2
•
•
1
and discon-
3
Connect the flat plug from
the power adapter 1.
Plug the power adapter into
the plug socket 2.
4
3