Making Calls Using Project Assignment (Cost Billing) - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
> <
BASIC SERVICE
> <
PIN / COS?
> <
PIN 1?
...
Making calls using project assignment
(cost billing)
You can assign external calls to certain projects.
Prerequisite: Project numbers (from 1 to 5) have been
configured for certain projects and you have an account
code (ACCT) for the project.
u Open the system menu.
[
Select and confirm the basic service.
Either:
o
Enter a service code between 61 (for project number 1)
and 65 (for project number 5).
o
Enter the PIN.
or:
[
Select the menu item and confirm.
[
Select the required PIN and confirm.
then:
o
Enter the external phone number.
Then make your phone call as usual
A time limit is applied to project assignment. It is
automatically deactivated if you have not used
your handset for a period of more than five
minutes, for instance.
Conducting calls – enhanced functions
Page 43.
65