Conducting A Conference - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
> <
TOGGLE
> <
RETURN
> <
CONFERENCE
86
Switching to the caller on hold
[
Press the Display key to switch between the two calls.
Ending the present call – returning to the other call
[
Select the menu item and confirm.
Setting up a three-way conference
[
Select the menu item and confirm.
A warning tone advises you that a conference is now in
place between all three users.

Conducting a conference

In a system-supported conference you can include up to
8 internal and external users. Users with system tele-
phones can execute and/or use all functions listed be-
low at the same time. ISDN telephones and external
users are passive users and can only be added to the
current conference.
You can include users and conferences from a remote
system in your own conference. The remote stations
can set up a conference of their own and extend it. The
members of this conference are included in your cur-
rent conference – but they cannot perform or use the
following functions.
The following functions are supported for all conference
members with a system telephone:
• Setting up a conference when calling a user or
receiving a call or making a consultation call or re-
ceiving a second call.
• Accepting a waiting call and including the caller in
the conference.
• Toggling between the conference and a consulta-
tion call or waiting call.
• Holding a consultation call during a conference and
adding it to the conference.
• Interconnecting conference members from two in-
dependent conferences via a remote network.
• Putting the conference on hold, if line keys are
installed.
• Viewing all the conference members.
• Transferring the conference to a new user.